趣彩彩票app下载

你现在的位置:趣彩彩票app下载>企业动态>

自动打胶机打胶不饱满的原因有哪些?

浏览:
  一、打胶速度过快导致的
  1、 It is caused by too fast gluing speed
  有的客户为了加快自己的生产节奏追赶生产计划,将打胶速度认为调整的过快,导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了,如果我们需要加快打胶的速度调整了打胶机的移动参数的话,那么我们对应的也应该对供胶系统也进行相应的设置,比如这时候我们就需要加大供胶压力,增大打胶机的出胶速度来配合对象的移动速度的增加。如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。
  In order to speed up the production pace and catch up with the production plan, some customers think that the glue filling speed is adjusted too fast, so that the glue has not completely reached the qualified standard and the head has moved to the next position for glue filling operation. If we need to speed up the glue filling speed and adjust the movement parameters of the glue filling machine, then we should also adjust the glue supply system accordingly Corresponding settings, for example, we need to increase the glue supply pressure, increase the glue delivery speed of the dispenser to match the increase of the moving speed of the object. If we only increase the speed of the dispenser independently without adjusting the pressure, it is likely to occur that the dispenser is not full.
  二、供胶压力不足
  2、 Insufficient glue supply pressure
  这个情况其实小编在种情况的已经进行过描述了,即便你没有对打胶机的移动速度进行调节也出现了打胶不饱满的情况,那么也有可能是供胶压力过小导致的。这时候我们仅仅需要调整供胶压力即可完美的解决这个问题的发生。
济南双组份打胶机
  In fact, this situation has been described in the first case. Even if you do not adjust the movement speed of the dispenser, there is also a case of insufficient dispensing, which may be caused by too little pressure of glue supply. At this time, we just need to adjust the glue supply pressure to solve this problem perfectly.
  三、机头感应器损坏
  3、 Head sensor damaged
  这种情况非常的少见,但是也不排除这种情况的发生。在我们的打胶机机头有一个对铝条深浅进行探测的感应器,如果发现铝条过深或者过浅的时候他会自动的调整移动的移动速度以及供胶压力(自动调整幅度是小范围内的)。如果我们的铝条本身就深浅不一,在加上我们的感情器损坏的坏就会发生这种情况!
  This kind of situation is very rare, but it can not be ruled out. There is a sensor to detect the depth of aluminum strip in our dispenser head. If the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed and glue supply pressure (the automatic adjustment range is small). If our aluminum bars are different in depth, this will happen when our emotional organs are damaged!

上一篇:合适点胶机是如何选择出来的?
下一篇:点胶机的针头与胶水使用时应该注意啥?

  • 官方微信
澳彩网彩票app下载 博乐彩票app下载 金誉彩票app 趣彩彩票app下载 财神彩票app下载 58彩票app 财神彩票app 幸运彩票app下载 永盛彩票注册 欢乐彩票app